Asia版 2020年1号

以下のリンクから、ウェブマガジンの記事をお読みいただけます。

回收利用 : 循环经济为成功作出贡献 / Recycling: Circular Economy – A Contributing Factor to Success

与汽车领域的设备供应商相反,废物处理和回收技术的供应商的订单量出现了真正的激增。 Herbold Meckesheim已经有了2020年的全部订单。
Contrary to the equipment suppliers for the automotive segment, the suppliers of waste disposal and recycling technology see a real boom in incoming orders. Herbold Meckesheim has full order books for 2020.

挤出吹膜 : 采用文丘里效应实现经济地生产挤出薄膜 / Blown Film Extrusion: Using the Venturi Effect for Economical Blown Film Extrusion

德国亚琛工业大学塑料加工研究所(IKV)开发出了一种创新的自适应空气控制系统,使挤出吹膜设备的产量提  高了32%。
An innovative adaptive air control system developed by the Institute for Plastics Processing (IKV) at RWTH Aachen University enables the throughput in blown film extrusion to be increased by up to 32 percent.

测控技术 : K-XRAY Rotomat KT – 降低阻隔膜的壁垒 / Measuring and Control Technology: K-XRAY Rotomat KT – Lowering the Barriers

K-XRAY Rotomat KT是第一个基于X射线,适用 于吹膜线的测厚仪。K-XRAY使用Kundig的标准膜 泡扫描系统,以确保快速的测量,这对于阻隔膜 的厚度控制尤为重要。
The K-XRAY Rotomat KT is the first X-Ray based thickness gauge for blown film lines. The K-XRAY uses Kündig’s standardized bubble scanning system to ensure quick measurements that are especially crucial for thickness control of barrier films.

3D电子元件热成型–来自研究所 : 开发了卷对卷制造 工艺的电子组合元件 /
3D-Electronics, Thermoforming – From research: Roll to Roll Components developed

当中国BOPA薄膜的领先者、全球最大的薄膜生产商厦门长塑投资 时,整个塑料行业都在关注。 刚刚从布鲁克纳机械有限公司订购 了2条新的分次拉伸薄膜生产线,这是迄今为止同类产品中最快, 最宽和最强大的。
The Chinese BOPA film pioneer Xiamen Changsu just now ordered two new sequential film stretching lines from Brückner Maschinenbau which are the fastest, widest and most powerful of their kind so far.

挤出技术-实例分析 : “丹麦托盘”高速生产线 Extrusion Technologies – Case Study:
High-speed production line for “Danish trays”

减少和避免废料的产生已经显得越来越重要。 由于法律 的要求和公众的压力, 生产商们面临着越来越大的挑战。
Waste reduction, avoidance of plastic materials and last but not least recycling are becoming increasingly important. Due to  legal requirements and public pressure, manufacturers are faced with growing challenges.

测量技术 : 医用导管的质量保证 / Measuring Technology: Quality Assurance of Medical Tubes

SIKORA提供创新型的测量和控制设备,用于在医用管材挤出 过程中的质量控制。
SIKORA supplies innovative measuring and control devices for quality control during the extrusion of medical tubes.

 

CONTENTS:

内容/ Content 04
企业短讯/ Branche Intern 06
挤出工具 : 挤压刀具的流动动力学 / Extrusion Tooling: Flow Dynamics of Extrusion Tooling 26
挤出技术-实例分析 : “丹麦托盘”高速生产线 / Extrusion Technologies – Case Study: High-speed production line for “Danish trays” 28
挤出技术-实例分析 : “丹麦托盘”高速生产线 / Extrusion Technologies – Case Study: High-speed production line for “Danish trays” 31
回收利用 : 循环经济为成功作出贡献 / Recycling: Circular Economy – A Contributing Factor to Success 34
挤出吹膜 : 采用文丘里效应实现经济地生产挤出薄膜 / Blown Film Extrusion: Using the Venturi Effect for Economical Blown Film Extrusion 36
窗膜 : 超越市场的要求 – 采用高端表面检测系统提 升了产品质量 / Window Film: Exceeding the Market’s Requirements – Product Quality with High-End Surface Inspection System Improved 38
测量技术 : 快速而精密地测量管状物样品 / Measuring Technology: Fast and Precise Measurement of Tubular Samples 40
质量控制 : 100%检查用于医疗防护和卫生产品的无 纺布材料 / Quality Control: 100% Inspection of Nonwoven Web Material for Medical Protection and Hygiene Products 42
测控技术 : K-XRAY Rotomat KT – 降低阻隔膜的壁垒 / Measuring and Control Technology: K-XRAY Rotomat KT – Lowering the Barriers 44
推动优化 : 使用完整的软件解决方案进行生产监控 和优化 / Process Optimization: Production Monitoring and Optimization with Complete Software Solution 47
测量技术 : 医用导管的质量保证 / Measuring Technology: Quality Assurance of Medical Tubes 48
工艺 : 必不可少的齿轮泵 / Processing: Essential Gear Pump 49
吹塑 : 考特斯用吹塑工艺生产320 升氢气瓶内胆 / Extrusion Blow Molding: Producing 320-LiterHydrogen Liner in Blow Molding Process 51
3D电子元件热成型–来自研究所 : 开发了卷对卷制造 工艺的电子组合元件 / 3D-Electronics,  Thermoforming – From research: Roll to Roll Components developed 53
薄膜挤出 : 全球首条7+米生产线:BOPA薄膜业的又一个里程碑 / Film Extrusion: World’s First 7+ m Line  – Another Milestone for the Production of Biaxially Oriented PA Films 54
本期杂志中的公司目录 / 敬请垂询 / Firms in this issue / Imprint 56